Ski touring boots: How to adjust and care for them

Home » Blog » Outdoor Gear » Ski touring boots: How to adjust and care for them
skinning coire an lochain

Alpine ski touring / AT boots are highly specialised (and expensive) equipment. Learn more about their features and how to use them.

There’s a bewildering array of excellent backcountry-capable boots on the market now. Gone are the days when we only had a couple of ski touring boots to choose from. Now, we have dozens of high-tech designs, each aimed at a particular style of backcountry skiing. This post highlights the basics of what makes a good touring boot, with some tips for using all that tech on the mountain.

Scarpa denali ski touring boots
Back in the day, Scarpa Denalis were one of the only touring boots available

So, what are ski touring boots?

Ski touring boots are ski boots that have extra features to allow efficient walking and climbing, plus compatibility with ski touring bindings and boot crampons. Compared to downhill boots, ski touring boots are more complex and expensive, but far better suited to backcountry adventures.

Design and features

Backcountry boots have to be:

Modern alpine ski touring boots fit precisely and ski just as well as downhill versions – and in some cases, better. They have a lightweight shell, made from advanced plastics (eg: Grilamid or Pebax). Manufacturers sometimes use carbon fibre to further increase stiffness with minimal weight. Some shells also include waterproof vents, heat-mouldable sections and seamless-welded fabrics. Specialised buckles are lightweight, highly adjustable and snag-free. Some boots use cords or dials to further reduce weight. A switch or lever on the cuff engages the all-important walk/ski mode. Ski touring boots also offer a much bigger range of ankle movement (ROM) than downhill boots – usually between about 55 and 75 degrees. A curved rubber sole provides grip on rock and snow.

How should ski touring boots fit?

Ski touring boots should fit relatively close when in ski mode, to give you good control (especially important off-piste). Check the boot holds your heel securely in ski mode. In walk mode, they should allow your ankle to move freely and not pinch anywhere. Check there is enough room for your toes – try kicking with the toe of the boot, or walking downhill.

Boot advice for ski tourers (10 tips)

10 tips to get the most out of your alpine ski touring boots (see text for details)

  1. Get the fit right

  2. Wear good ski socks

  3. Use a compatible binding

  4. Check your crampons fit

  5. Align the tongue

  6. Clip in carefully

  7. Check your mode

  8. Fix hotspots

  9. Avoid wet feet

  10. Check for wear and tear

Get the fit right

Rush this bit at your peril! You need both a snug fit for sking and a looser fit for walking. You may want to size up slightly from your downhill boot size (depending on the manufacturer’s last). If starting with your walking boot size, beware of going too big. Use an experienced boot fitter, try on lots, take your time, wear footbeds, get ’em heat moulded. All the usual stuff.

Wear good ski socks

A single pair of good ski socks should be enough. They are thinner and strategically padded to avoid ruining that good fit. In addition, the warm inner boot means you shouldn’t need thicker socks.

ski socks
Always wear decent ski socks

Use a compatible binding

There are several ski touring boot sole standards, including ISO9523, Pin-only, WTR and Gripwalk (ISO23223). Not all touring boots will work in all touring bindings. A good ski shop will be able to advise you on which boots are compatible with which bindings. Also, see our post on Backcountry Boot and Binding Compatibility for more info.

Check your crampons fit

Unlike downhill boots, ski touring boots are compatible with crampons. Step-in crampon bindings work really well and are fast. But it is important to check if the boot’s ski/walk mode switch interferes with the crampon heel clip. Specific ski mountaineering boot crampons avoid this problem (eg: Grivel’s Ski matic crampon binding).

touring boots and crampons
Compatibility with walking crampons is a major plus of touring boots

Align the tongue

When putting your touring boots on, check that the tongue lines up properly with the cuff. Depending on the boot design, a misaligned tongue will get mangled and prevent the boot being done up properly.

ski touring boot hinged tongue
Touring boot tongues must be aligned properly to avoid damage

Clip in carefully

Clipping in to touring bindings usually takes a little more care than with downhill bindings. The bindings and boots are more complex. Furthermore, they can be easier to break if misaligned or forced.

Check your mode

Practise changing your walk mode setting whilst wearing gloves and without looking. Some are much easier than others. Most of them will require you to flex the boot a bit to lock it into ski mode. It’s surprisingly easy to accidentally ski in walk mode!

Fix hotspots

Almost all ski boots have a pressure point somewhere, eventually. It’s a fact of life. Avoid blisters with a good blister plaster or dressing. Heat-moulding or grinding the shell is a possibility, but do it professionally to avoid ruining the boot.

Hot spots and pressure points need attention to prevent blisters or numb feet.

Avoid wet feet

Ski touring boots are only waterproof up to about the level of the ankle pivot. Rivets below this should be sealed on the inside face of the shell with waterproof tape. Baggy ski trousers are better at keeping out snow melt and rain, than narrow mountaineering pants. Remember wet inner boots also promote blisters, so take the inners out every now and then and get ’em dried.

Check for wear and tear

Walking is unavoidable and will gradually wear out the sole unit. Over time, this can reduce both grip and binding safety. Walk on snow where possible and regularly check the binding interfaces for wear or trapped grit. Also try to avoid damaging buckles when walking through boulderfields. Touring boots can be resoled (some even come with different swappable sole units). Wash the outside of your boots under a tap if they’re minging – this is a good chance to do a quick visual inspection.

iso9523 worn ski boot touring sole
Extreme wear at the toe can prevent bindings working properly and reduce grip when walking.

So, when considering what to wear for ski touring, you should aim for proper backcountry boots if possible. In fact, they are so important that we would usually advise beginners to buy boots before almost any other big-ticket item. Apart from being more comfy than hiring boots, this also helps when trying out different skis and bindings. When it comes to hiring or buying them, go to a shop with knowledgeable, trained staff to get the lowdown on current models and fits. And don’t rush it!

Ski touring training group